scanner

CS4MXi

On this page you’ll find a good all round metal detector in our C.Scope CS4MXi review. The CS4MXi is a well thought of detector that is great for UK conditions and will not break the bank. With some unique features this is definitely one to look at.

The Beginner Or Experienced Detector

One downside to this detector is that it doesn’t have any preset search modes that you can switch on and start detecting. Many other models like the Garrett EuroAce have these capabilities which makes it easier for beginners to pick up the detector and go. We wouldn’t recommend this to someone who is completely new to detecting.

For the experienced metal detectorist this is a highly configurable detector for a good price. It has a lot of settings that can be altered to get the perfect balance for the conditions that you are searching in. There is no doubt that this is a great detector but it will require a bit of knowledge to get you up and running.

Buying British Metal Detectors

There is no doubt that a lot of us where possible like to buy British. C Scope are a British company that design and manufacture their detectors here in the UK. C.Scope are a leading force in the metal detecting market along with makes like Minelab and Garrett who all offer very good mid priced detectors, if you are undecided on which model to go for this could be the deciding factor.

Another thing to consider about buying British is that C Scope are testing there detecting technology on the ground type that you will be detecting on all of the time which is very useful for a UK machine.

C Scope Customer Service

C Scope have a reputation for building quality meta detectors that are robust and fit for most types of detecting. This is backed up with a reputation for great customer service, if you have any problems with one of their detectors or need a little help you can get in touch and they will help. When you are investing a lot of money into a detector this is an important factor to consider as you don’t want to be out of action for too long with a little problem.

The C Scope CS4MXi Features

This model is packed full of great features that we will run through below. Have a look through and see if it has the capabilities you are looking for.

17Khz Frequency

The CS4MXi runs on a high frequency of 17Khz which is very sensitive and will allow you to find objects that are deep as well as very small objects that need a high frequency to find. C.Scope have worked hard to develop the technology at this frequency specifically for typical UK and European soil types.

Interchangeable Search Coils

This model has the ability to run four different search coils from the C Scope range. This allows you to search for different items at different depths and really makes this a versatile detector. You can add a coil that will search deep in the ground or a coil that is designed to pick out those small bits of precious metal. The coil that comes with it is an 8 by 11 inch elliptical search coil that is a great all rounder and is fine for most jobs.

Auto And Manual Ground Control

This is a good feature as you can set it to auto and off you go pretty quickly. The detector will adapt to the ground as you go. If you want a specific setting and really want to refine it for a certain area then you can set it yourself.

Two Discrimination Controls

You can set two levels of discrimination to screen out low frequencies and accept others that you don’t want to discard. This is a great feature that makes the detector very configurable.

Pin Point Recovery

This mode allows you to hold the detectors in one place rather then swiping it and find the exact place where the object you are looking for is buried. This will stop you spending a long time digging holes and make sure you can dig a small and accurate hole.

Light Weight

This is a light weight metal detector that is easy to pack into a bag and walk long distances with it or search for long periods of time with getting a sore arm.

Conclusion

The CS4MXi is a great detector from a company that has a brilliant reputation for quality products but it does have its downsides. For the beginners out there it is not a click and go machine that you can get used to before you start tampering with the settings. For the experienced it is a good comprehensive metal detector that is very sensitive and configurable. There are other detectors on the market at this price range that offer more overall but if you have a bit of knowledge and are a C Scope fan this could be the one for you.

E-Trac

Now lets have a look at a high end detector in our Minelab E-Trac review, that is perfectly balanced for the beginner and very advanced detector. This model is packed full of great features that will get you some great finds. Undoubtedly one of the best all round metal detectors on the market this is a serious detector for all from the experienced treasure hunter down to the beginner.

Rave Reviews

There are so many fantastic comments from happy users who have left E-Trac reviews, it is hard to find a bad word said against it. Many experienced metal detectorists regard it as the detector to have and wouldn’t change it. It is so sensitive and can find objects at a very deep level. This really is a great model.

Value For Money

This might sound odd but we think this is great value for money. Yes, it is expensive but you will only buy one metal detector once you have bought the E Trac. It is a truly versatile and powerful detector that caters for 99 percent of metal detectors needs. If you like to change your detector often then it’s not great value but if you want it to last then this is a great machine to buy.

The Beginners

If you are a beginner that wants to buy once and own a detector that will stay with you and last for many years then the Minelab E-Trac is the machine. It has four preset detecting modes that make it very easy to start detecting with one click. The four modes make it easy to use in different areas and once you are feeling confident you can start to work with some of the highly advanced settings that are on offer. It is expensive for a beginner machine but you really are buying a top notch metal detector.

The Advanced Detector

For the advanced treasure hunters out there this is a machine that won’t disappoint. It has cutting edge technology that will help with some great finds in the toughest conditions such as sea water, rivers, soil full of iron and minerals. This detector has it all especially in the general UK conditions.

The Minelab E Trac Feature

Below is a long list of great features that are packed into this detector. Have a run through, there is not much that Minelab have not covered!

Minelab FBS Technology

The Full Band Spectrum technology allows the ETrac to work on a set of frequencies from 1.5Khz right through to 100Khz. The operating system analyses the responses and interprets them to give a very accurate set of results from frequencies that go very deep to frequencies that are very sensitive to give you a full picture. Having this big a range of frequencies makes the set up truly versatile for many conditions that other detectors would struggle with.

Lightweight Waterproof 11 Inch Double D Coil

This is a great quality coil giving versatility by enabling the detector to go into a lot of challenging places. It delivers a sharp and accurate signal across the frequencies for pin point accuracy and depth. The waterproof element allows you to carry on searching in the sea or river, places where a lot of detectors won’t go.

Minelab X Change

This allows you to connect the Minelab E Trac to your computer via a USB connection to save and download your favourite settings and save them in case you need to go back to them. Handy if you change your settings a lot.

QuickMask And SmartFind

These bits of technology allow you to accurately set the discrimination levels based on conductivity and ferrous levels. You can also accept and reject based on these 2 indicators as well making your search much more effective.

Four Preset Detecting Settings

With these settings you can just click the detector on and start. Brilliant for those new to detecting or those that don’t go that often. The four presets are coin mode, high trash mode, beach mode and relic mode. This will cover most types of basic detecting to get you going.

Four User Modes

There are four user modes that can be set up and saved for different environment that you come across quite often. It saves all of the set up time when you go back to them. A real time saver.

Pin Point Mode

Pin point accurately your find and the size of it before you start digging down into the ground.

Threshold Adjust

The threshold can be adjusted over a wide range to get absolute precision on the signals you are receiving helping to filter out the rubbish signals which will vary based on the ground you are searching.

Trash Density Settings

This setting allows you to tell the machine that there are a lot of signals you don’t want which will increase the sensitivity making it easy to sift through the unwanted objects.

E-Trac Review Conclusion

Well what can we say. This is a brilliant metal detector that is held in very high regard by the metal detecting community. It is very configurable and runs that latest technology to cope with some of the toughest terrains but also has some brilliant beginner click and go settings which will balance the machine in an instant so it is ready to use. If you are one of those people who really like to work on the settings you will be at home with the E Trac as it has a lot of settings to play with. It is an expensive metal detector but it is one of the best and will last a long, long time and get you some of the best finds you could imagine. A truly great metal detector for all and another fantastic metal detector from Minelab.

AT Gold

Now we are going review the Garrett AT Gold metal detector, a specialist machine that is designed with one thing in mind – finding gold! Garrett have produced this specialist machine for all of you keen prospectors out there.

Not For The Beginner

The AT Gold is a detector that needs to be set up properly to get results. It’s not ideal as an all rounder and you will need experience of metal detecting to understand all of the settings. It would be great as a second machine for some specialist searches.

The Gold Rush

In many areas, the search for gold is a big hobby. It brings with it the possibility of a big find that could be worth a lot of money. Finding gold is all about collecting up the small nuggets of gold that lie in the ground that are not easy to find. The specialist gold detectors (the Garrett AT Gold included) are designed to locate these small valuable metals and discriminate against others. These machines need to be very sensitive with very adjustable set ups to be able to search without getting interrupted by annoying signals of unwanted metals.

Garrett Specialist Metal Detectors

This is a specialist metal detector from Garrett, primarily aimed at finding gold but can also be used for finding coins, relics and jewellery. The American brand are experts in producing high end specialist metal detectors with particular jobs in mind such as prospecting or security. With so much gold prospecting happening across America they are perfectly positioned to build and test this machine.

The Garrett AT Gold Features

Have a look through the specialist features that are available on this model. It has some pretty good features that you won’t find on a lot of other detectors.

18 Khz Frequency

The AT Gold runs at a high 18Khz frequency which enables it to detect those small bits of metal including tiny gold nuggets, small pieces of jewellery and coins. A lot of detectors at lower frequencies may miss some of these tiny objects.

Advanced Ground Balance

Garrett technology enables you to set your ground balance to get rid of unwanted signals and also allows you to set a wide ground balance setting that will adapt to the changes. A very handy feature that will make set up quicker. You can also automatically ground balance the metal detector for a fast set up.

Waterproof To 10 Feet

This really is a detector that will go anywhere. The AT Gold is submersible up to 10 feet or 3 metres which is great if you are on the trail of something and don’t want to stop at the waters edge. Often gold and precious metals is found in river beds so this is an essential feature for this sort of prospecting.

Adjustable Threshold

A great feature that allows you to adjust the threshold of the frequency to make it easier to pick out the important frequencies. There is also other audio settings to enhance the signals that are sent back.

High Resolution Iron Discrimination

The discrimination settings are very advanced giving you over 40 levels of iron discrimination allowing you to filter out the junk signals and concentrate on the signals that matter. This is highly adjustable and will allow you to really fine tune the metal detector to the area you are searching.

Electronic Pin Pointing

Pin pointing on gold metal detectors is very important and needs to be good to find some of the tiny nuggets that are in the ground. Once you think you have struck gold you can switch it into pin point mode and get the exact depth and location of the find.This makes digging a lot easier especially for small objects.

Digital Target ID

The digital target ID will show up on the LCD screen giving you a 0 to 99 score on the conductivity of the metal you have found which really helps in the identification of the object. This will assist in making the decision of whether to dig or not to. Important for metals like gold and silver that are highly conductive, this feature will help you rule out the other unwanted metals.

Three Preset Searching Modes

There are three preset searching modes to get you started, the all metal mode for searching for deep objects then the Discrim 1 and Discrim 2. These setting are designed to give the detector a well balanced starting set up.

Conclusion

To finish our Garrett AT Gold review, this is a machine that is built for the specialist and not by any means a metal detecting all rounder. If you have metal detectors already and would like to search for gold all jewellery this could be a great investment but as first machine there are plenty of other metal detectors in our reviews that will do a better job. This model has all of the attributes you need when pursuing gold like being able to go under water and a high frequency set up. If you are looking for a gold machine this is a great machine from a great manufacturer.

EuroACE

In our Garrett EuroACE review, we are going to have a detailed look at this very highly rated metal detector. This is a fantastic all round metal detector designed to be used in the typical European metal detecting environments.

Outstanding Reviews

The customer reviews for this Garrett EuroACE metal detector (aka the Euro Ace 350) are outstanding with a 5 out of 5 rating on average from many Amazon customers. People are very happy that this machine is easy to use for the beginner and has enough ability to get some really good finds. Plenty of people have upgraded to this from a very basic machine and have found it brilliant with very few problems.

The metal detecting community as a whole love this machine which will get you started at a good level for very little money. It will also work in some tough terrains making it a good all round machine.

Great Value For Money

This is great value for money, it has a lot of features and is a very powerful machine that will help with some great finds at depth for not a lot of money. There are a lot of us that like the look of metal detecting that don’t want to spend a fortune on a high end machine. For most hobby users this is enough, if you are out every weekend for hours on end you may want to go up a few models but this is a fantastic starting point.

Great For Beginner

This is the perfect machine for serious beginners who want to enjoy detecting and learn as they go. The five preset search modes will get you going at the click of a button and as you get more used to it you can set it up for certain areas and searches. Once it arrives its quick to put together and you could be out detecting with a powerful detector in an hour!

A Back Up Detector

For the serious detectors amongst us this is a perfect back up machine if your main detector is being fixed or serviced. It has enough power and features for a good days detecting at any level and will allow you to have a good back up machine at a low cost.

The Garrett Brand

The American company have specialised in producing cutting edge technology to the commercial and hobby world of metal detecting. Their specialist machines have the ability to search for gold as well as search underwater and their commercial machines provide security all over the world. By buying the EuroACE you are purchasing from a company with a brilliant reputation for quality.

The Garrett EuroACE Features

Below we are going to run through some of the features of the Euro Ace and you can have a look and see if they match up to your requirements.

8.25Khz Frequency

The EuroAce runs at a good all round frequency of 8.25Khz allowing you to find some small objects that need good sensitivity and also find some deeper objects.

Iron Discrimination Control

The advanced iron discrimination control allows you to filter out the unwanted signals from rubbish items that are on the ground and allows you to concentrate on the signals from the precious metals and coins that you are searching for. You can accept or reject signals to improve the discrimination pattern.

The Coil

The coil that comes with the Garrett EuroACE is a 28cm by 22cm PROformance Double-D search coil giving you a lot of detecting power. There are other coils in the ACE range that are compatible with the Euro Ace making it a very versatile detector.

Five Preset Search Modes

The five preset search modes will set up the detector to work at the click of a button. They each have different setting and discrimination setting which is great for a quick start until you get used to the machine and start setting it up yourself if you feel you want to. The five preset modes are Jewellery, Coins, Custom, Zero, Relics.

Pin Pointing Mode

Once you have come across a potentially good find you can switch it to pin pointing mode to refines your search and dig it up quickly rather then having to dig a large whole that takes ages and is hard work.

Depth Indicator

The LCD display will tell you how deep your coins are located which also makes the digging process a lot easier and will give you an accurate idea of where to dig combined with the pin pointing.

Garrett Clear Sound Easy Stow Headphones

The Clear Sound head phones from Garret are included with this model for a fast start and no extra costs. These are head phones that are designed especially for metal detecting for great finds.

Light Weight Metal Detector

The Euro Ace weighs in at 1.27kg which makes it a very light detector to search for hours on end and even pack up into a ruck sack for long walks having a quick search of land when you feel like it.

Conclusions

One of the most highly rated metal detectors we have come across that manages to provide a very versatile and comprehensive detector at a price that is very affordable and not too much of a commitment if you are dipping your toe into the metal detecting world. We would highly recommend this machine to beginners and less frequent users and many people would agree with us. It comes with a 2 year parts and labour warranty for peace of mind. If you are a seasoned veteran of metal detecting, our review of the Garrett EuroACE shows it would be wise to invest a bit more and get a more powerful machine.

X-Terra 505

On this page you’ll find our Minelab X Terra 505 review. A great all round detector that offers great discrimination and sensitivity for the budding detector. If you are looking to take a step up to the next level from your budget machine or just starting out this is good detector to start with.

Getting Great Reviews

The Minlab X Terra 505 is getting a lot of great reviews from the metal detecting community. As an all round machine users are finding it to be accurate and easy to use. It is a robust build and will work for hours on end with out hurting your arm. For the UK all rounder that is not searching gold it is a great machine.

Buying A Minelab Metal Detector

By buying Minelab metal detectors at any level you are buying a high quality machine. They have a brilliant reputation for building great metal detectors and providing great customer service. The many years of experience they have build up purely in developing metal detector technology shines through in the X Terra 505 bringing you a quality all round meta detector.

Detectors For The Beginner

If you are just starting out in metal detecting this could be a wise choice of detector. It has some preset detecting modes to get you going and is an all round machine. Once you are used to it you can start changing the settings and using it for different types of soil and varying types of searches. It will last you many years without becoming too basic.

For The Experienced Detector

This is a highly versatile machine with a great range of discrimination and ground balance settings and also has the capability of running at different frequencies by changing the coil. You will be able to use this in some demanding conditions and in a very wide range of searches including prospecting, coin hunting and searching the beaches and river banks.

Light Weight Metal Detectors

The X Terra 505 weighs in at a very lightweight 1.3kg which will allow you to detect for hours on end and not get a sore arm. For those of you that are not used to a lot of exercise this is something to consider on long trips.

If you intend to take it on long walks and use it with the family for some fun then it is ideal, packing down into a bag and being light weight means you will hardly notice it while you are walking.

The Minelab X Terra 505 Features

Below we will run through some of the impressive features that are available on this detector. Well suited as an all round detector see if they suit you.

The Coil: V Flex Technology

The coil that comes with the detector is a 9 inch water proof concentric coil that runs at 7.5 Khz. The V Flex technology allows you to change the frequency that the X Terra 505 runs at by changing the coil. It can run at 3Khz, 7.5Khz and 18.75khz depending on the coils that you choose to use. The low frequency 3Khz coil is great for searching for deep and large targets whereas the high frequency 18.75Khz coil is great for prospecting and searching for the small precious metals like jewellery. The coil that comes with it is a great all rounder at 7.5Khz.

Speaker Or Headphones

You have the options of using headphones or using the internal speaker to listen to the frequencies. For the best results it is always better to use the quarter inch jack headphones to cut out any external noise that could interfere with the frequencies.

Pin Point Mode

Pin point mode will help you accurately locate the treasures that you are searching for before you start to dig. There is an audio and visual indicator making it very easy to use.

Adjustable Ground Balance

The highly adjustable range allows the user to filter out any unwanted noise from minerals in the ground.

3 Preset Detecting Modes

For the beginners this is great, choose one of the modes and you are away. Fast and easy to use and as you gain confidence you can start to configure the machine yourself.

Large Discrimination Range

Get rid of a lot of the unwanted signals by having a large range of discrimination. Old nails and ring pulls will be a thing of the past with a well set discrimination level.

Depth Indicator

You can see on the LCD display how deep the object is even in pin pint mode which will make digging a lot easier and a lot more accurate.

Pin Point Recovery

Switching to pin point mode will help you accurately locate the object you have found before you start digging. You will save a lot of time and effort by digging small accurate holes, a great feature.

LCD Display

Easily read all of the feedback from the X Terra 505 with the LCD display. This combined with the frequency through your headphones will give you some pretty accurate information.

Conclusion

A great mid range Minelab metal detector at a reasonable price. It has a good balance of preset and manual settings to make it a very versatile machine that can be used in many areas from the beach to the fields. It doesn’t have a few of the features of the 705 but it is a good detector in its own right and doesn’t break the bank. If you are looking for a detector to try a few types of detecting like beach combing, prospecting for precious metals and some general coin hunting in the field then this is for you.

X-Terra 705

Our Minelab X Terra 705 review has uncovered a very versatile multi purpose metal detector that is suitable for many different uses including hunting for coins, jewellery even searching for gold. A highly comprehensive machine in mid range price bracket.

Great Reviews

We love the X Terra 705 and it is getting a lot of very good reviews customers as well. Generally the view is that the detector is very sensitive and has many setting to make it versatile in most situations. This is a detector that is suitable for the most advanced treasure hunters out there and is a great price.

Beach And Land Detector

This is great for those of us that want to go beach combing as well as searching around the local fields. The coil is waterproof so it won’t get damaged. It is great for prospecting those small fines metals in ground that is full of unwanted items with the highly adjustable settings. For coin and relic hunting it is great and will search out deep coins as well as fine metals. For the hobby detector this is a machine that will go almost anywhere and in the toughest conditions.

For The Experienced Detector And Beginner

This is a detector that will serve the experience treasure hunters well and has enough settings to get it running exactly as you want it and suited to the ground that you are searching. For the beginners who want a machine that will last then this is also a good buy, you will be able to learn how to set it up and as your experience grows you will be able to use more and more of the functionality and features to get some great finds. The four preset detecting modes will get you running quickly and the ground balancing can be used automatically until you are confident of setting it up yourself.

Minelab: Quality Metal Detectors

Minelab have spent many years perfecting metal detectors that are sensitive to the areas that they are searching on. They have perfected building detectors that are great for all round hobby detectorists using the experience they have gained from the high end commercial and specialists markets. They have a great reputation for their machines and great customer service to go with it. A great brand to buy from.

The Minelab XTerra 705 Features

Below we are going to take a look through some of the great features that this metal detector offers. Have a read through and see if they are what you are looking for.

Multi Frequency Detector

The XTerra 705 runs at 7.5Khz with the standard coil that comes with the machine. This can be altered by changing the coils to 3, 7.5 & 18.75kHz for really great flexibility which makes that detector very useful in many situations.

Minelab X Terra V Flex Technology

V Flex allows you to change the frequency of the machine by changing the coil for different sensitivity levels and for searching different areas. A great feature that makes this a great detector for some specialist searches like gold detecting as well as general hunting in different types of ground.

Water Proof 7.5 Inch Coil

This is a great coil that allows you to search the river banks and beaches allowing you to go that bit further than the average detector. It also gives you a lot more land to search if you live by the coast and a whole new type of detecting. All seven X Terra coils in the range are compatible with this detector.

Automatic or Manual Ground Balance

This feature allows you to get rid of a lot of ground noise as you detect which will enable you to hear the signals from small targets like tiny pieces of gold. This is an essential feature for the experience treasure hunters out there that only want to dig where it matters!

Four Preset Modes

Get going quickly with the four preset detecting patterns for the beginners out there and the people that don’t want to spend ages on a complicated set up. Really useful if you are starting out and can then be built on as you go.

Adjustable Iron Mask

This really helps when searching for items in ground that has a high iron content, particularly useful if you are prospecting for small pieces of metal that are easy to miss.

Two Pin Point Modes

These modes will not only help you accurately find your treasure before you start digging but will also show you the shape and size which will help in your search! Very handy as you can be so accurate in your digging in depth as well.

Prospecting Mode

Really good for finding all sorts of precious metal whether you are searching for gold or trying to find a precious bit of jewellery that has been lost.

LCD Display

The LCD display gives you a lot of feedback from the detector as you search which is easy to read.

Target ID Stability

Really good for getting a good signal in areas that are full of unwanted iron and other materials. It gives you a very precise and solid signal that will help narrow down your search.

Conclusion

Minelab once again have come up with a great detector that is suitable for all uses. It will find items deep down and also find some really small sensitive metals that other detectors won’t find. The features are vast and the detector can be set up to suit all areas and with the waterproof coil this is great. Very highly recommended by many users and us. A great buy that will suit everyone from the beginner up to the advanced detectorist.

X-Terra 305

Lets take a look at the X Terra 305 from Minelab, this is the entry level X Terra machine offering great value and tons of features for a price that is affordable to all.

Brilliant Reviews

The Minelab X Terra 305 is getting great review from websites and users alike. The overall feedback is that it is a brilliant detector that is suitable for some pretty advanced detecting not just the beginners. A real market leader in its price range. Have a read below of some of the comments:

The iron discrimination is so good on this machine compared to other machines of this price. Very Happy! 5 Out of 5!
For the price a really great detector. The features are brilliant, the only down side I could find was a lack of visual target ID bit for this price its more than I would expect. 7.5 out of 10!!
Top machine, I am super happy with it!
Replaced my old machine with this and am over the moon. Soil mineralisation in red clay is an issue in the place that I detect and this has managed it well. 5 out of 5!!

For The Beginner Or Less Frequent User

This is the perfect metal detector for the beginner or less frequent user that wants a machine with good features but does not want to spend a fortune on a top end machine. There are two preset modes to get you up and running quickly and enough features to build your knowledge and confidence as you get more experienced. A lot of us are looking for a machine that will allow us to try out metal detecting to see if it is for us and won’t be out for hours on end a few times a week. If that is you then this is a great metal detector that will server your needs and more.

As A Back Up Detector

For the keen metal detectorists out there who can’t be without there machines then this could be the answer. It has a lot of great features and is a competent metal detector that will cover most areas with no problem. If your main machine is being fixed or serviced then this is the ideal back up. You can still have hours of good treasure hunting with the X Terra 305 and get some great results. You won’t be disappointed.

A Metal Detector For The Family

This is a great metal detector for family use. It is light and can be packed down easily to take out on long walks. Any one can pick it up and put it in a preset mode and start searching for treasure and coins. You never know what you will find out in the country side and this is a great start.

Perfect For Kids

For the kids this is the perfect choice from the vast array of metal detectors to develop their interest in the hobby without spending too much. There is a short shaft available to make it easy to use. Most kids like to try a few hobbies along the way and the key thing is give them a detector which will deliver results to keep them interested whilst having a machine that they may not pick up for a couple of months. This is great for that and as they grow in confidence and become more interested in the hobby it will still be good enough for year to come.

Minelab: A High Quality Brand

When anyone mentions metal detectors they often think of Minelab. The Australian company have been world leaders in the development of metal detector technology for decades and are dedicated to producing very high quality machines at the cheaper end of the market as well as the high end. The knowledge they have developed from the high end and specialist metal detectors flows down into the lower priced models like the X Terra 305 delivering very high quality machines. Definitely a great brand to buy from.

The Minelab X Terra 305 Features

We’ve talked a good bit about how good this metal detector is, but now lets have a look at the features.

V Flex Technology

The V Flex technology is a single frequency detector that can change the frequency by changing coils making this a very adaptable metal detector for different environments and ground types. It can be run with 7Khz and 18Khz coils for high sensitivity.

Good Ground Balance

Easy to adjust ground balance function from 0 to 20 to deal with ground mineralisation.

Threshold Adjustment

Easy to change threshold setting with a wide range to help differentiate between objects at different levels and sizes.

Pin Point Recovery

Once you have found an object you can put it into pin point mode to assess the depth and exact spot before you start digging you pit to make sure you find it quickly.

Very Lightweight

Coming in at 1.3kg this is a very lightweight and easy to use machine. You can use this for hours on end without any problems at all. And it can be carried in a bag on long walks without weighing you down.

LCD Display

An easy to read LCD display to read the feedback from your detector as you are searching.

Conclusion

The Minelab X Terra 305 is a great buy, there is very little you can find wrong with it and the price tag is low. It is suitable for so many uses and is versatile so can be adjusted for many different ground types and areas. For the family you will have loads of fun and for the serious hobby detector you will get some great finds and not be disappointed. The user reviews are great which is always good to see. We highly recommend this model against other similar metal detectors, a great buy from a very high quality brand!

CTX 3030

Now we are going to have a look at the Porsche of metal detectors, our Minelab CTX 3030 review. This is a serious bit if kit aimed at the real enthusiast that wants to push their metal detecting to the edge but also offers click and go settings for the beginner with deep pockets. The CTX 3030 can handle pretty much anything that is thrown at it and will carry on where you have to stop! A real beast of a machine for the fanatics out there.

Minelab are probably one of the most famous brands out there in the metal detecting world and produce quality detectors at all levels. This model is the amalgamation of all of the high end technology and brilliant features that they have developed over the years. The experience of all of the years detecting and building detectors has gone into producing this model that has a reputation as being one of the best on the market.

The Features

This machine is jam packed with features that make it one of the most versatile machines on the market. Read through this impressive list and look at some of the features you hadn’t even thought about! There will be something for everyone here so if you are looking to buy once then this is the one stop shop of metal detectors!

The Frequency

The CTX 3030 runs on multiple frequencies to help give a really accurate signal. The FB2 system is built to send accurate feedback from the coil to the detector meaning you will be able to dig for great finds and ignore the bad ones.

The Coil

The coil that comes with the 303 is an 11 inch DD search coil that is good for most areas. This advanced waterproof coil coupled with the sophisticated software allows brilliant interpretation of the signals for absolute accuracy.

GPS Tracking System

This is a great tool that allows you to keep a record of where you have been and where you would like to go. You can accurately cover a big area over multiple visits and not go over the same ground twice and also plot your route for hunting before you go out. If you explore a lot of new areas then this a great feature and means you won’t get lost out in the remote areas. The information can be uploaded to the Minelab software on your computer to keep records of your hunting.

Wireless Audio

If you get fed up with having the headphone cable hanging around when you are detecting then this is a nice feature. You can put the CTX3030 into some awkward spots at arms length with out getting into a tangle and for the every day searching it will be less hassle and more comfortable.

5 Preset Hunting Modes

The click and go function for different types of soil are fantastic and offer the beginner hours of fun without the hassle of going through all of the complicated set up. Many of the high end machines can be tough to use without a lot of experience but these five modes allow you to use it straight away. I’m not sure how many beginners will purchase the CTX3030 at this price level, but if you are it is a great machine for the beginner.

Waterproof

So your on the trail of some fantastic finds and think there could be some great objects of high value in the area but unfortunately you have come to a river or the sea. This detector is water proof to 3 meters which means you will be able to hop in and keep searching. This gives you a big advantage over a lot of other detectors that have to stop at the waters edge. A feature that is great for the really adventurous amongst us!

Fantastic Discrimination

This machines offers highly adjustable discrimination to cut out the signals you don’t want and focus in on the metals you do want to find. This is great even in the most iron littered areas and makes this machine suitable for almost any areas.

Digital Signal Processing And LCD Display

The LCD display gives really accurate feedback from the machine in colour. All of the setting are really easy to read on this screen and make the 3030 a really easy to use detector. The digital signal processing means you get brilliant colour target information on the screen to help accurately identify what you are looking for.

The Downside

One downside to this model is the weight. Coming in at over 5lbs it is quite heavy and if you are out for hours on end you will start to feel it. It is pretty inevitable that a detector with all of these features will be a bit on the heavy side but it is very well balanced which means it doesn’t feel to heavy.

This detector has so many features that they may not all get used and there is also a lot that could go wrong with this machine although it is built to the highest standard.

Value For Money

There is no two ways about it this is an expensive machine. There are many other metal detectors on the market that claim to do the same job in the typical UK environment. But do they? This machine has cutting edge signal processing and software that can interpret the signals with super accuracy giving good depth. There is every chance with this machine that you will pick up finds that other simply don’t pick up and if you are looking for gold and expensive items it may well give you an advantage!

Really the key thing to this being value for money is if you think you will utilise all of the features over time. If you do then it is great.

Summing Up The Minelab CTX 3030 Review

There is good reason that the CTX 3030 is considered one of the best metal detectors in the world, it is brilliant. This metal detector has it all and comes from a brand that is renowned for producing the best quality metal detectors. This treasure hunting machine is second to none in accuracy and functions and even caters for the beginner. There will be no excuses that you need a better machine and in time you can really push your detecting to the limit.

For all you technology geeks this is the one to buy. It has it all and will stay at the top of its game for a long time. A highly recommended metal detector that is held in high regard by many of the experts.

CS6MXi

Now we are going to have a look at the mid price range metal detector from C-Scope the CS6MX-i. This is a great metal detector with a brilliant reputation that is used by many metal detectorists in the UK.

The British company are famed for building great detectors and if you like to buy British then look no further. The company has been building high quality metal detectors for over 30 years which gives them so much experience in the UK market. Buying a C-Scope machine means you are buying a detector that is used by many enthusiasts and has great reviews.

This model has been specifically designed to be great for all round use in the UK and European market with real care taken in building a highly robust machine that will be sensitive in all areas and will serve as a great choice for beginners and for the seasoned detectors.

This metal detector is a motion type of detector which is a relatively new but very good metal detector technology which means that the detector is at its most effective as it is sweeping over the ground.

If you are a beginner that is looking to buy a detector that will last you a long time and will grow with your experience then this is the one for you. You will have years of fun exploring different terrains and will be able to configure it more to your preferences as you get used to the sport.

The Features

The C-Scope CS6MX-i metal detector has so many great features and a few that you won’t find on other machines. The feature set really sets this detector apart and makes it a very versatile machine indeed. Have a look through and check if the features on this detector line up to the requirements you have. If you are a beginner you can compare these against other reviews we have written to understand just how good a metal detector this is.

The Frequency

This detector runs at 17Khz on the bespoke C.Scope VLF motion operating system which makes it a very versatile machine. This frequency allows you to search for the smallest of objects when scouring the land for things like very thin coins and tiny bits of jewellery. The 17Khz signal gives a very crisp response and great sensitivity in areas with lots of iron and also allows you to find some deep objects with the right coil.

Three Pitch Audio Signal

The three pitch system allows you to discriminate very easily between metals before you start digging and is also adjustable depending on what you are looking for and the type of land you are on. Some of the frequencies can be turned down as well so that you can concentrate on finding worth while objects not just lumps of iron.

The Coil

The coil is an 8 inch by 11 inch DD elliptical coil that is great for most conditions in the UK and is a versatile coil that will allow you to search out many types of metal very accurately. The CScope CS6MX-i is also compatible with other C Scope search coils making it very versatile and useful in most situations.

The coil is waterproof so that you can search in shallow water and rivers. Don’t put the whole detector in though!

Pin Point Mode

There is the all important pin point mode which is not available on some of the cheaper detectors on the market. This allows you to exactly pin point the object you want to dig up after you have found it with your normal detecting set up. This means your digging time is reduced and far more accurate than digging a wide whole to make suer that you find it. A great feature if you don’t have all day to spend out searching.

Highly Configurable

This detector can be set up for different conditions and preferences so that you can get the optimum performance. The sensitivity control and discrimination control allow you to disregard certain signals and really tune into other especially if you are beach detecting or in areas with a lot of iron.

Headphone Socket

To maximise the fantastic accurate signal this machine gives you there is a quarter inch jack socket to plug in your headphones. This allows you to block out all of the outside noise that can interrupt the finer frequencies you need to pick up. The socket is at the bottom of the machine for good weather proofing.

On The Downside

On the downside there are no preset detecting setting for a click and go set up which is very handy for the beginner but don’t let this put you off as it just needs a little bit if set up to get you going and will appreciate the power as you start to get used to it.

Warranty

The C Scope CS6 MXI comes with a two year warranty giving you the satisfaction that you have invested your money into something that will last. The price bracket is not at the high end but it is still significant enough to require some safety net. In the event that you do need a repair or a service C.Scope are renowned for fantastic customer service. Very important if you are using the detector a lot and want to keep it in tip top condition.

Value For Money

This is a great value metal detector. The fact that it is good as a beginner machine and can be set up to be a machine for the experienced detector means that you will buy this model knowing you won’t have to buy again. It can use various different coils so you don’t need two detectors. A great bit of kit with a good reputation and money well spent.

What The Users Say

Its all very well us giving you our point of view in our CS6MX-i review but what are other people saying about this C Scope model? Below are some of the comments that have been made by detectorists using the machine in the UK.

– Been using this machine for a good while and am over the moon with the performance. Time constraints mean that I need a quick and easy machine to set up and this is pretty simple. I have had some great finds near to the surface and also some pretty good deep finds.

– This is a well sealed unit that can take some of the good old English weather with no problem. I have been out in all weather and not had any problems.

– After coming from a CS3 up to the CS6 I was pretty impressed with the power. The three tone audio is great and gives you great control but it did take me a while to get to grips with it and fully understand what the frequencies were telling me.

– This is the third machine of this level I have had and wanted something be comparative to my Deus. It has been great as it is so configurable and the build quality is excellent. Pretty important up here in Wales as its hard going on some days!

Summing Up The C.Scope CS6MX-i Review

To sum up our CS6MX-i review, this is a great all round machine for the UK detectorist that is looking for a machine that is versatile in all areas. The 17Khz frequency gives great accuracy and is backed up with the new motion technology to give a very powerful metal detector indeed. Built for all levels of detecting and many terrains such as the beach and even gold detecting this is a great machine. The company behind it has a great reputation which should back up the great model reviews. A highly recommended detector.

Ace 150

On this page we are going to have a look at a fantastic metal detector with our Garrett Ace 150 review. This machine offers fantastic value for money giving you tons of features for a great price. If you are new to metal detecting and have a small budget then look no further as these detectors offer a lot. This one of the most popular metal detectors in the UK with a great reputation.

Coming into the world of metal detecting can be very daunting as their are so many different types of detectors that cost varying amounts and its hard to work out which way to go. A lot of the more expensive machines have brilliant reputations but are very hard to set up and not really for the beginner. What most beginners want is a detector that is really easy to set up and get out into the fresh air. Metal detecting is not for everyone so most people want to spend a modest amount of money and spend some time using the machine before they decide if this is going to become a serious hobby. The Ace 150 detector is the one for you if you are in this boat allowing you to quickly get out and about and learn about how metal detectors work as well as having fun at the same time by finding some nice old coins in the ground.

The American company has been around for many years and earned a great reputation for building cutting edge metal detectors that have a fantastic reputation. Buying a beginner level Garrett means you get all of that experience and technology poured into a metal detector that does all of the basics very well. It’s always a good idea to buy metal detectors from an established brand that concentrate just in detectors as they specialise in producing the best technology for their machines.

The Features

The Ace 150 has many brilliant features that are well suited to the beginner and hobby metal detectorist. If you think you are one of these people then read through the features and see if they match up to your requirements.

The Frequency

This detector operates at a low 6.5 Khz frequency which is good to get started and will penetrate ground well but is not as sensitive to the smaller objects as the higher frequencies. This frequency is fine to get started but as you start to refine your searches it may well be better to get a higher frequency detector.

The Coil

The coil that comes with the Garrett ACE150 detector is the bottom of ACE 6.5 inch by 9 inch ProFormance Coil range but it well up to the job and will give you hours of fun. The great thing about these detectors is that you can upgrade the coil to other models in the ACE Coil range if you need to at a later date.

Three Preset Search Modes

This is a brilliant feature that gets you started with the click of a button. The preset modes set the detector up to give you the optimal signal to find certain objects. If you are new to detecting and need time to get used to how metal detectors work, this is a great feature. With the click of a button you can be up and running and searching out treasure. The more personal set up can come at a later date when you are more familiar with the sport. The three preset modes are set up to target coins, jewellery or all metals. A great feature that is well worth considering.

Depth Indicator

This is an important feature and will let you know how far to dig down for the hidden treasure. You won’t be digging indiscriminately looking for the coin your detector has picked up, you should be able to dig down to a fairly accurate depth knowing that your coin or other piece of metal is there.

Large LCD Display

Another important feature as you need to be able to read the feedback from your ACE 150 easily as you start to moving the device over the ground. The display will give you all of the accurate target information you need without stopping the movement of the machine and will also allow you to read it clearly in bad light.

Interchangeable Search Coils

This detector allows you to change search coils with others in the Garrett ACE Coil range. As you start to cover different ground and want to experiment with your detector, this is an important feature as it allows you a lot of flexibility as you become more experienced.

Low Battery Indicator

This one is self explanatory, when your batteries are on the way out it will let you know. Lets hope you have some spares available if you are out in the fields when it happens!

Headphone Jack

This is an important feature. The signal can be heard using the detector without headphones but it is much more clear if you are wearing a set of headphones to pick up the fine changes in the frequency. This is important if you are detecting in a noisy area like near a road or in a windy field. To get the best accuracy you need to have a clear signal and this quarter inch jack allows you to plug in a wide range of head phones.

Easy Storage

Important if you are taking detectors out on a long walk and want to store it in a bag or have limited space at home. The detector comes apart into three pieces and breaks down into small package that is easy and quick to re assemble.

Back Up Metal Detectors

As well as being a really popular machine as a main detector many serious metal detectorists use the ACE 150 as a back up metal detector. If you are out and about searching for coins and other objects very frequently it is a good idea to have a back up detector in case your main machine needs fixing or servicing. This detector offers so many features for the money and is a comprehensive metal detector in its own right so will be a perfect back up.

On The Downside

There are not a great deal of down side to this detector as it covers all of the basics well. However, here are a few.

There is no electronic pin pointing to accurately find the object in the ground, saying that, it is still pretty easy to pinpoint objects pretty well with the detector as you get used to it.

There is no accept or reject discrimination on this detector which could be a bit of a downside to the regular detector.

The number of sensitivity settings is low at four but this covers the basics well. If you are looking for a more configurable machine it may be worth hopping up to the Euro ACE which covers most of the down sides.

The frequency is a bit low at 6.75Khz which is not great for the smaller objects, a couple of models up will get you a higher frequency machine that will help find the tiny coins you are hunting.

Warranty

Garrett offer a two year parts and labour warranty on their ACE 150 detectors, giving you piece of mind that this is built to last the course. Just because you are buying an entry level machine you will still want it to last and this warranty gives you peace of mind.

Value For Money

This is great value for money covering all of the basics very well and giving you a metal detector that will give you hours of fun for a very small budget. This is a great machine for the beginner with out investing too much money and a great value back up detector for the experienced treasure hunters.

Summing It Up

It is a very popular machine in the UK and this is because it offers a lot of power for good value. The features cover all of the basics well and the preset hunting modes are great for those of us that just want to click a button and go. The reputation of Garrett gives users confidence that they are getting a high quality detector that will last for may years. Overall, our Garrett ACE 150 review has found that this model comes highly recommended by many customers.